QIANLI ICOPY PLUS 2.1 REPAIR PROGRAMMER WITH EXTENSION BOARDS (BATTERY/TRUE TONE/VIBRATOR/LIGHT SENSOR)

Qianli iCopy 2.1 Repair Programmer With Extension Boards(Battery/True Tone/Vibrator/Light Sensor)

Modules for Selection

-Set 1 (Programmer+True Tone+Battery)
●1 x iCopy Plus Programmer
●1 x True Tone Board (For iPhone 8-11 Pro Max)
●1 x Battery Board (For iPhone 5G-XS Max)

●1 x Lighting Cable Board

-Battery Board (For iPhone 11/12 Series)
●1 x Battery Board (For iPhone 11/12 Series)
* The Battery Board is only compatible with iPhone 11/12 Series for Battery Repair, which is not included in 'Set 1'

If you want to buy the Battery Repair Flex Cable (Tag-on/Built-in), click here

Features

● Available to operate without PC connection

● Each iCopy plus 2.1 owns a 2.8-inch HD Display

● Can restore True Tone without the original LCD screen

● Available to upgrade the software and hardware to adapt new cell phone models

● Multiple language interfaces, available for simplified Chinese, English, and Spanish

● Imported customize chips, support the device to run with high performance

● Ergonomics designed, for a more comfortable operation experience

Functions

Vibrator/Light Sensor/ True Tone Board

After replacing the screen, vibrator, True Tone, light-sensing function, or vibration function may be unstable, this board can help solve the problems

● True Tone Restore

Starting from iPhone 8, the True Tone will be lost after the screen has been changed.

Available to: 8/8+/X/XR/XS/XS Max/11/11 Pro/11 Pro Max

With original screen: Copy the original screen’s chip data to a new screen, True Tone can be restored

(The screen should be on the right side)

Under some special situations, the original screen is lost or can not be read.

For this case, use QianLi Repair helper software to restore the True Tone.

*Notes:

1. The international version for the iCopy plus 2-generation of Qianli does not have a built-in battery. It needs to be plugged into the power supply for operation.

2. Due to the open-source problem of software, please make sure to use the support software on the computer with the Windows system (not macOS/MacBook).

● Vibrator’s Identification

Connect the original vibrator to the corresponding connector

Click to read & copy the original vibrator’s data

Then write the data into a new vibrator

*Available to 7/7+/8/8+/X

● Baseband Logic EEPROM Data Read & Write

Connect the Baseband CPU chip relative pins to the board correspond zone by jumping a wire

Press the "Read" and "Write" button at the same time to enter into the Baseband programming interface

Click the "read" button to acquire chip data

*Available to 6-X/XR/XS/XS Max

● Battery Detection Board

When the battery should be replaced, copy the original data to the replacement battery, to prevent the cellphone system rejection.

(For example, the iOS 13 battery health alert after a third-party manufacture battery get installed)

Connect the battery's connector to the corresponding connector on the battery detection board to copy the original battery data

Connect the new battery to write in the original data, clear cycle life, modify battery efficiency

● Lightning (Data Cable/ Headset) Detection Connecting Board

To detect whether the lightning data cable/headset is original or not

- Detail cable and chip information can be displayed

- Dual sockets to provide a longer service life

The Package of Qianli iCopy Plus 2.1

Original Carton Package