Microscope 0.5X Stereo Barlow Lens - (Height Lens)

Applications:

• Mobile phone motherboard inspection
• PCB repair and inspection
• Mobile phone microsoldering
• IC and component inspection
• Charging port repair
• Connector and flex cable repair
• Fine electronics repair
• Soldering and rework under a stereo microscope

Suitable For:

• Binocular stereo microscopes
• Trinocular stereo microscopes
• Mobile repair microscopes
• PCB inspection microscopes
• Electronics repair workstations
• Mobile phone repair technicians

1. Check that the microscope objective has a compatible auxiliary lens mounting thread.
2. Remove the existing auxiliary lens if one is already installed.
3. Thread the 0.5X Barlow lens onto the microscope objective carefully.
4. Adjust the microscope focus after installing the lens.
5. Position the PCB or device underneath the microscope and set the desired working height.
6. Begin inspection or repair with the additional working clearance provided by the 0.5X lens.

A reducing Barlow lens decreases magnification while increasing working distance and field of view. This combination is particularly useful for hands-on PCB and soldering work. :contentReference[oaicite:2]{index=2}

• Provides a longer working distance for practical microscope repair work.
• Creates a wider field of view for observing larger PCB areas.
• Provides more room to operate soldering irons, tweezers and other tools.
• Useful for mobile phone motherboard and electronics repair.
• 0.5X reduction helps make the microscope more suitable for hands-on repair applications.
• 165mm working distance gives useful clearance for professional repair work.
• Compact auxiliary lens design allows an existing stereo microscope to be upgraded easily.

• 1 × Microscope 0.5X Stereo Barlow Lens

Note: Microscope, stand, eyepieces, camera and other accessories shown for demonstration are not included unless specifically mentioned in the product listing.