Menu
Your Cart

KAISI K2000 HOT AIR GUN WITH 3 NOZZLES

KAISI K2000 HOT AIR GUN WITH 3 NOZZLES
KAISI K2000 HOT AIR GUN WITH 3 NOZZLES
KAISI K2000 HOT AIR GUN WITH 3 NOZZLES
New
KAISI K2000 HOT AIR GUN WITH 3 NOZZLES
KAISI K2000 HOT AIR GUN WITH 3 NOZZLES
KAISI K2000 HOT AIR GUN WITH 3 NOZZLES
KAISI K2000 HOT AIR GUN WITH 3 NOZZLES
  • Item Code/Product Code: K2000
  • Weight: 0.85kg
₹1,499.00
Ex Tax: ₹1,499.00

Kaisi 2000W 220V hot air gun Industrial Electric controlled temperature building hair dryer LCD screen heat gun DIY power tool


Caution: this is a high-precision heat gun. When it is adjusted to 0 gears to close the heat gun. The air engine of the heat gun still works for 20 seconds for the high-temperature gas outlet. This is not the quality problem. We do a long laboratory test and verify that using 20-second protection can protect the LCD screen and the PCB board. The result is that the service life is up to 20,000 hours.

This version has two wind energy controls. And it has a thermoregulator with an LCD screen. You can adjust the temperature from 80 to 600 degrees Celsius. Our heat gun is different from that of other sellers. We offer you a high quality heat gun. We use good quality key parts in Control PCB, heating coil and air motor.

Income-value and well-fabricated quality.


Use of the product :

It is suitable for drying, paint removal, drying, defrosting, preheating, welding disinfectant glue, bending of plastic tubes, packaging films of heat shrink tubes, tubes, etc.


Instructions :

1. When the hot air gun is turned on, first turn on the power supply and adjust the switch to the low or high section. After hearing the "buzzing" sound (indicating that the engine is working), the heating cable will turn on slowly. When used for a period of time, if the large tube turns black, this is due to the high temperature and has no effect on the use of the hot air gun.


2. If the motor does not rotate during use, immediately set the switch to position 0, remove the plug and send the hot air gun to the sales office or the manufacturer for repair.


3.When you stop using it, you must set the switch to position 0 and place the head of the iron tube of the hot air gun on a flat surface so that it cools naturally. If the iron tube head is low, the inner heat will not dissipate quickly. As a result, the internal temperature of the engine increases and the life of the heat gun is reduced. After the iron pipe cools down, it can be stored.


4. In order to help cool the hot air gun and prolong life and accidents, when use is stopped, the hot air gun switch is first adjusted from the upper section to the lower section, then burned for 15 seconds and then adjusted from the low section to 0, and timely disconnect!


Technical parameter :

Power voltage: 220V/110V

Power watts: 2000W

Plug type: EU/CN

Approximate airflow for Step 1:250L/min

Approximate airflow for Step 2:600L/min

Weight: 0.85 kg


Note :

Do not pull the plug until the engine has stopped working completely 20 seconds later.

Do not touch the mouthpiece.

Keep away from children

Do not use for hair dryer.

Do not direct the heat towards people or animals.

Do not use it in humid conditions.

Do I know when I work?


The package includes :

1 x Heat gun

3 x pcs nozzles


NOTE : THIS PRODUCT IS NON DIGITAL,THIS PRODUCT IS WITHOUT DIGITAL SCREEN.


1

2

4

5

6


Safety instructions

1. Avoid the abuse of this hot air gun and use this product according to the instruction manual.

2. There can be an extremely high temperature in the air outlet and in the surrounding area, so you should be careful to avoid burns.

3. Keep the air outlet soft and free of double objects.

4. The minimum distance between the air outlet and the object when used is 2mm, calculated by the air outlet.

5. For different jobs, choose a suitable air nozzle; the temperature may be slightly different depending on the air nozzle.

6. Unplug for a long time after completing the work.

7. Drive carefully, do not hit or make the machine vibrate strongly.

8. Regularly check and maintain this product. Replace this product when it is damaged.

9. Do not use it when your hands are wet or when the air gun is aligned to avoid short circuits or electric shocks.

10. Do not use near flammable gases or other flammable substances. After use, do not place the machine immediately around flammable gases or flammable materials.

11 In some areas, such as walls, ceilings, floors, arches or others, may contain flammable substances. If they are used in these areas, you can turn on these materials, and it may not be easily found and cause property damage and damage. When working in these areas, use a hot air gun to move as much as possible. If it is maintained or suspended at certain points, the surface of the board and the combustible materials will burn.

12 Children do not know the danger of electrical products, do not use them or place them where children can reach. Don't let the children come or touch.

Write a review

Note: HTML is not translated!
Bad Good