RELIFE RL-084 METAL DESOLDERING PUMP VACUUM SUCTION TIN GUN FOR MOBILE PHONE BGA REPAIR

Relife RL-084 Metal Desoldering Pump Vacuum Suction Tin Gun for Mobile Phone BGA Repair

Features:

• It is used to collect the melted solder during the welding and disassembly of electronic components
• It is widely used in the field of electronics, electrical maintenance, and process welding
• Adopt a sealing ring design to effectively prevent air leakage, high elastic rebound design, instant high efficiency, and strong suction
• Quickly and effectively remove the solder and quickly separate the welded body
• Ergonomic design, non-slip pattern design, comfortable grip
• The innerspring adopts the back-pull design, and the instant suction is strong
• Lightweight, compact design, fast tin removal, one-handed operation

Specification

Temperature adjustment range: 1°

Scope of application: tin removal

Net weight: approx. 26 grams

Material: half stainless steel half plastic

color: blue

Operation Manual

1. Press the piston of the tin suction device down to lock it.

2. Heat the solder joint with an electric soldering iron to melt the solder.

3. Take off the soldering iron and quickly put it into the tin suction device to paste the solder on the resistance, and press the button on the tin suction device.

4. If it is not clean once, it can be repeated many times.

Skills

1. Ensure that the piston of the solder suction cup is well sealed. Before energizing, plug the hole of the solder suction cup with your finger, press the button of the solder suction cup, if the piston is not easy to pop out in place, it means the seal is good.

2. The size of the tin suction head is different, so choose the appropriate specification.

3. The solder suction head is worn out and should be replaced with a new one.

4. Before the solder paste touches the solder, dip a little rosin to improve the fluidity of the solder.

5. The head contacts the pad slightly longer. When the solder melts, take the solder joint pin as the center, then stretch out your hand clockwise to draw a circle, and then press the tin suction button.

Notes

Please allow 1-3cm differences due to manual measurement.

Due to different monitors and lighting, the pictures may not show the actual color of the item. Thank you for your understanding.

Usage Steps

1. First press down the piston of the tin remover until it is stuck
2. Heat the solder joint with a soldering iron until the solder melts
3. While removing the electric soldering iron, quickly attach the tin suction nozzle to the solder joint, and press the tin suction button; if the suction is not clean at one time, the operation can be repeated many times.

Tin dross cleaning steps
1. Rotate the push rod counterclockwise and clean it directly after opening
2. Use a long thimble to clear the blocked suction nozzle

Package includes:

• 1 x Desoldering Pump